Another Toolbox Addition

Before we go any further, I hope you’re not thinking that I’ve spent several hundreds of pounds [or dollars – not that I actually have either at the moment!] on something shiny and new to add to my tool collection! What it is, is that I’ve come up with another improvement to the toolbox tote that I built some time back.

This new feature (one on either side) allows me to carry a pair of 20in or 22in hand saws (panel saws, if you will; the cheap disposable ones – I’m sure you know! ;-)).

Quite simply, I prepared a length of pine (30mmx25mm, if my memory is correct) a ran a slot down one edge, using the narrowest cutter I had available from my set. It is ever so slightly wider than these saw blades (which are less than 1mm thick) but, they still do their job and it does mean that I can easily store and draw my saw (!) with ease whenever necessary. Perhaps I should add that this grooved strip of wood is simply screwed to the side of my toolbox.

One possible improvement might be to insert a slip of timber above this strip (approx. 13mm thick), embedded with a couple of rare earth magnets. This would fit in between the box side and the blade and further help to keep the saw steady while my tools are in transit.

In the workshop though, I tend to just hang these saws on a screw or nail, like many other woodworkers! 😀

If you didn’t see Upgrade #2 last year then, have a look here.

Thanks for reading.

One thought on “Another Toolbox Addition

Any questions? Please get in touch.

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.