Here on my blog, I receive a reasonable number of hits on a regular basis, regarding a few specific search engine terms that include ‘halogen oven’.
One of these involves air-frying – or, more specifically; the optional air-frying attachment that can be purchased for most 12lt ovens.
With this in mind, I recorded a video several weeks ago and, on Monday evening, I go around to completing the editing process and uploading my brief introduction to the use of an air-frying attachment in my halogen oven.
I do hope this video is of use to others and, if that is the case, I will look to record further footage on the use of the halogen oven.
If you’ve read closely within my other posts on the flat I’ve been living in since November, you might’ve picked up on the fact that there’s been a persistent ‘issue’ with the heating in my current home. I believe I also touched on this in the YouTube video I filmed where I walked you around the property. I’ve been wanting to write this post for a while. In fact, I was intending to include this in my follow up video (but for destroying my camera in an attempted DIY repair…).
It’s a subject where the ‘fear of who could be reading‘ has deterred me from making it all public but I’m pleased to now be able to report that there has recently been some significant progress made.
I’ve only been walking for twelve-months but it didn’t take long for me to learn that it is quite essential to kit yourself out properly, if you’re going to do this seriously. I’m not talking about spending hundreds of pounds on lots of expensive clothing items with breathable membranes. After all, I’m only climbing the local hills. I’m not looking to scale Mount Everest (just yet)!
Along with a decent pair of walking boots (much sturdier and more comfortable than trainers – my current ones were about £35), there are a few other items I would recommend to anyone who’s thinking about walking or hiking as a recurrent hobby. After a recent shopping trip to a local outdoor clothing store, I felt that I would share some of this here with you this evening.
My latest YouTube video offers a couple of simple tips on using and maintaining your dust extractors that could help to maintain and restore your airflow. If you’ve suffered a loss of or drop in suction from either a twin-bag HVLP chip collector or, perhaps even a smaller HPLV vacuum-type; these tricks could really help you out.
One tip near the beginning offers an easier way to reattach the bottom bag without a second pair of hands. Also, you get to see how convenient it isn’t to access each of my extractors in a small workshop! 😉
I’ve been having great difficulty with Windows Live Movie Maker (now known as just Movie Maker) of late and that is the main reason I’ve been unable to upload Part 2 of my latest cutting board series until today. It’s been a month since part one otherwise and I had been struggling to find the time to sit down and chop through over one hour’s worth of footage but, it’s online now and is available for you to view, share and critique. 🙂
If you’re struggling with the same program yourself, here are some tips that I tried to get it working…
Today is May the 4th and, just reading that aloud, you can imagine some of the Star Wars-related jokes that often occur around this time each year. Now, the 1st of May for this year was known as Woodworking Safety Day. It’s very similar to the Safety Week we’ve had for the last few years. I can’t remember whether I even wrote a blog post for this in 2012 but this year, I knew that I wanted to make a video that was perhaps a little different to what the average woodworking enthusiast might be planning.
I wouldn’t like to claim that my video or its content is an entirely original concept but I chose to focus on the sliding compound mitre saw. This video also covers a couple of common maintenance questions for the Makita LS1013 that frequently brings traffic to this blog. I am my usually nervous, anxious self for the most part but I end this 23-minute film with two short tales of personal experiences where my health and/or safety has been compromised…
As always, comments and feedback are always welcome. Before I end this post, I’d like to share with you an interesting video I found on improving a mitre saw purchased at the lower-end of the market…
Until recently, my router table regularly looked like this inside, on a regular basis:
If the insides of your table are constantly in a similar state (cutting grooves with a straight cutter being the main cause of all this mess) then, I’d recommend you take a look at Steve Maskery’s latest video, below; in which, Steve reveals his latest workshop tip for more efficient extraction when the waste cannot reach the extraction port in the rear of your fence.
If the video doesn’t load or work correctly for you on this site, please try this link to YouTube. While you’re opening a new tab or window, I’d also recommend a visit to Steve’s Workshop Essentials site, certainly if you haven’t visited before. This tip also features briefly on Steve’s latest DVD [Volume 6: The Ultimate Bandsaw Tenon Jig – also recommended!!]