It was about a week ago that I returned the two rented DVDs that I’m going to write about briefly this evening.
This video was released (released?) last weekend and I do have a new one planned for the next couple of days (if I can fit it in, with the 20-mile walk on Sunday and all). I seem to be saying this quite frequently but it’s had possibly the best reception for any video of mine so far, when you look at the limited time at which it’s been available.
Woodturning without a lathe, while working along the basic lines of the construction of a bandsaw box… The kind of challenges I relish, as a bandsaw man!
I am also a ‘stats man’ and, within the first 24 hours, it received almost 200 views (big for me) and almost 20 clicks on the Like button, which again is a huge one for me personally! At the time of writing, it has received twice as many views and an extra dozen Likes so, I’d like to again say a big THANK YOU to everyone who has already participated in watching, liking, subscribing and sharing.
Hours before I uploaded that video, I passed the 800 mark for the number of subscribers to my video and so, another THANK YOU is in order for you all. 🙂
This video was inspired by another that I watched maybe a year ago. The main reason I didn’t use a log myself was because I didn’t have one to-hand and, to be honest, I’m never sure of what you can take in the woods and what you can’t… Plus, there’s often the issue (while I’m out walking) of carrying something very weighty back to my vehicle (I also remember finding lumps of driftwood on a beach near Burnham, but having parked several miles away). Not to mention the stash of offcuts I hold on to!! So, this is the video that inspired my approach:
Thank you all for reading and for watching.
I’d also like to spread my gratitude to everyone who has recently started following my page on Facebook, where we’ve just crossed the 60 mark. I don’t think I had even half this many followers 6 months ago so, another big THANK YOU to you! 🙂
I can’t remember exactly when I last blogged about making a guitar but I do recall (probably last year, when I purchased two sets of plans – or was that 2011?!) stating my intention here on at least one prior occasion. it’s been an ambition for the last, say, three-years and it’s only really in the last year that I’ve been able to build my confidence up to a level at where I feel fairly competent in having a go.
I would like to reiterate that I do not currently play a guitar; I have never played a guitar and I really don’t know much about them… From the three sets of plans I’ve now purchased (from JAGuitars), I’ve chosen to go with the Gibson SG style (my latest buy) simply because, to my eye, it has the most attractive and appealing aesthetics! Plus, while Googling for user-made replicas a while back, I came across some walnut SGs that looked quite stunning… And I still have more than enough walnut left over from a near-£300 purchase back in April. 😎
This is my first video in what is going to end up a series of indefinite length. There are questions over whether or not I’ll be able to finish this before November comes – I mean, it’s taken me about two months to complete the templates, to upload this video and now, I still haven’t ordered the necessary hardware or figured out exactly what I need to buy!
My current plan is to get the ‘workshop stuff’ (machining and hand tool work) complete before the inevitable cold snap arrives; regardless of where I’m living and where my tools are likely to end up at that time. I can imagine myself French polishing on a kitchen table if I have to (I dislike ‘plastic’ lacquers and, well… I made that table!!)… If it comes to it. To my mind; strings, straps and even scratchboards [if that’s what they’re called] can be fitted afterwards. I could even do that sat on a living room sofa with 8in of snow underfoot outside!
Anyway, I hope you like my ‘introductory’ video to this project. I have unnecessary trouble in uploading this one because my editing software decided to shuffle the order of scenes as I as working through my final cut! But, on Saturday night (Sunday morning), it did reach YouTube just after 1am and it’s been very, very well received since. Thanks largely in part to this video (along with your own efforts and contributions), I’ve now surpassed the 700 marks for subscribers to my channels. I feel as though I’m well on course to reach 1,000 before December! 🙂
Thank you all.
Since my last video update, I seem to have added two more films to my YouTube channel – I guess this delay in notifying you is another reason for you to PLEASE SUBSCRIBE to my channel, so that you find out before… You do?
I’d like to say a big THANK YOU for everyone has already subscribed because I have just this week passed the 600 mark – at this rate, I might just make it to 1,000 before 2014! 😉
My first video is the making of the toilet roll holder, which has already soared to almost 1,000 views in less than one week! It’s a ‘silent’ film, in the sense that I don’t narrate over or talk through any part of it. Some people dislike that but most seem welcome to it, judging by my current response. I’m always welcome to hearing what more people think and I’m keen to keep trying new things in future videos.
After that, you have a near-ten-minute film on setting the knives in my Axminster AW106PT, which I use solely as a thicknesser. I do talk through that one (a non-narration) and again, I’m always welcome to feedback on that as well.
I’m aiming to have a brand-new project-based video out by… Let’s say Monday night, as it is a Bank Holiday weekend! 😉
Thanks for reading, watching, subscribing, liking and have a great weekend! 🙂
Part 3 and the concluding episode of my Contrasting Cutting Boards series was uploaded to YouTube on Sunday night. Already, I’ve had a very welcome response and, although they’re not everything; at the time of writing this post, I’m averaging one Like for every ten views… And I do like this! 🙂
It’s been quite an enjoyable series to film and I do feel that my editing skills have improved somewhat in the two-years since I made a set of beech cutting boards (another popular series). I found myself with more than one hour’s worth of footage to sort through for each one and I’m pleased that I was able to essentially quarter each of them.
I imagine I’ll pick up more tricks with practice as I can’t imagine the ‘pros’ (highly popular woodworkers on YouTube) allow themselves to climb such a mountain, each and every Friday. Steve Ramsey made an interesting comment recently (it might have been on Keek or in his most recent Mere Minutes video) where he basically stated how and why he tries to keep his videos short (between 5-10 minutes each). With longer videos, he’s found in the past that views tend to ‘drop off’. He also mentioned how the average viewer can kind of ‘make up’ the bits that you don’t show, in between scenes and I certainly feel as though there are only so many times in which someone can sit through a sequence of planing or ripping timber.
I’ve personally received a lot of praise for the detailed, descriptive nature of my content and I want to reassure anyone reading this that you’re not about to lose that in future videos! I do plan to highlight some shorter tips and ideas around the workshop, in between whatever projects I can muster between now and ‘the move’… I’m thinking about the possibility of doing a ‘rundown’-type video on this series. Again, similar to Steve’s Mere Minutes and it’s also something that Laney Shaughnessy and Alex Harris do quite regularly. I’d keep it within the same channel but it might be useful to just sit and look back on things, even if I don’t have many questions to explain or answer.
I’m reluctant to spend any fortune (big or small) on new filming equipment with the uncertainty that lies ahead but I am keen to try and add a narrative to some future videos, to try and counter-act the issues I sometimes have with my voice and speech.
Thanks again to everyone for watching, liking, subscribing and for being here to read this post. 🙂
While the cutting boards I’m working on are slowly nearing completion, I found a little time yesterday evening to shoot a brief video on sharpening a pencil in the workshop. It’s hopefully a little bit of fun and a little light-hearted more than anything else but it’s mostly to keep my channel ‘busy’ as I’m well aware that it’s been a couple of weeks since Part 1.
As always, I welcome your thoughts and comments. If you have any of your own suggestions for sharpening then please feel free to share. What would be even better are your tips for not losing pencils in the first place! 😉
If you’re a subscriber to my YouTube channel then you may already be aware that I uploaded a brand-new video yesterday morning, featuring the mobile base I made for my site saw (Scheppach TKU) a few weeks ago.
I actually filmed all of this about four weeks ago but I’ve spent a lot of time since simply pondering over whether or not certain scenes are ‘good enough’; is my speech clear enough; would it be better for me to wait until I’ve tinkered with it a bit more before uploading the final edit…
In the end, I decided that it does display all that I need it to and I hope that you agree. Also, it had been several weeks since I last uploaded a new video and so, I really needed to get ‘something’ out there.
If you’d like to see the original video that inspired this design (and hence, why mine isn’t a ‘how-to‘ as such), then please follow the link below:
As always, comments, thoughts, opinions and feedback are always welcome.
Thank you and enjoy! 🙂
At work today, I spent a lot of time thinking about how I haven’t done a video for over one month now; how much I want to make the most of what time I have left in my workshop; how I need to crack on and finish the mobile base I started for my table saw, weeks ago… All whilst banging nail after nail in to small sheets of wavy birch plywood!
So, I was home by 17.00 and, after briefly stopping in the bathroom, I grabbed my camera and headed straight out to the workshop! Evenings have been almost mild this week (even though forecasters are now forewarning the threat of snow to follow this weekend – just when we were opening our arms to welcome the spring!). In two hours, I managed to get the following filmed and also, I made some good progress on the mobile base, which I’ll share with you another time.
This is something that I originally intended to film and publish about a month ago during Get Woodworking Week… I also have a ‘Valentine’s Gift’ idea that I’d like to film at some point but, it looks like I’m going to sail straight past Mother’s Day with that one as well! This video’s all about cutting a tee-halving joint, which is a traditional form of lap-joint, between two pieces at 90°.
I hope you enjoy the video. I’m incredibly nervous and fast-talking infront of the camera but I welcome all and any comments people may have. It takes a good hour for me to upload a video of this length and I do now try to keep them brief… That also means compromising a little on the finished quality but then, I’m only using Windows Movie Maker, which is a free program.
If I was to use something paid-for (like Camtasia), would I able to experience faster upload speeds?
Ideally, I’d like to have one short video to upload once each week. In fact, from the video I’m sharing with you this evening, I could easily have cut a section from the end and published that under its own heading.
Thanks both for reading and for watching!