Cyclonic Thoughts

Lately, I’ve been thinking and Keeking about dust extraction in my workshop. I’ve twice had to endure the dreaded bag-change on my large chip extractor during the process of making these chopping boards, which are very near to completion. At the other end of the workshop, I’ve been experiencing a long-term drop in suction, between my vacuum extractor and bandsaw, which suggests air or pressure is being lost within the Triton Dust Bucket.

Extraction setup for fine dust particles.

While investigating this without finding a single leak (by hand), I decided I would build a new stand for the dust bucket. In the photo above, it’s resting on an damp-ridden MDF construction that I’ve never fitted in my Workmate as a height-adjustable outfeed support… This has often been slightly too high, with the hose fouling the locking lever for the bandsaw’s rip fence.

Continue reading “Cyclonic Thoughts”