I’ll have some more food-related features in the coming days but this evening, I’ve decided to share a walkthrough on how to replace the bulb inside a halogen oven, as there’s a good chance it may help someone else.
In all fairness, the manual for mine (Andrew James 12lt Premium) wasn’t too bad and in case you’re wondering; I believe I bought this back in March, around the time of my birthday and the original bulb has only just ‘blown’ this past weekend, meaning it’s lasted almost 7 months after fair usage (assuming it was new to start with).
I’m going to take you back almost two weeks to a walk I did on one of my rare-but-recent days off work. Bristol‘s Blaise Castle Estate is significant to me for childhood memories of school trips and nostalgia; but also because, one year ago, it was the first place I visited when I decided to start walking on my own.
Last Sunday, as you may have already seen; I led the walking group for the third time. Now, I’m a bit stuck for ideas on where I could take them next but I have entertained thoughts about involving Blaise Castle. As fortune would have it, there’s a six-mile walk you can follow in Geoff Mullett’s Walk West Again. So, on this day, I decided to take a look at how the route pans out for myself.
Last weekend, I wasn’t at my best. I’m been suffering with a persistent cold/sore throat for a good week and I feared it was going to prevent me from getting out an enjoying what has become a weekly walk at this time of year. But it didn’t and, so that I didn’t push myself too hard, I decided I would finally tackle one of the shortest walks in the book titled 8 Wild Walks Across the Mendip Hills.
On paper it’s always looked like a pretty boring, uninspired walk, if I’m honest. There’s probably a lot I’m missing as I’m not much of a geography enthusiast plus, I’d already seen this area of the Mendips too many times. So, while I was up and ready to get going, I decided that I would try to extend the walk slightly, to make it more appealing.
With the lippings attached and flushed off with a combination of router and belt sander, I was ready to start doing further work to the top as Saturday came.
What I needed to do next was to creating a recess for the aluminium insert plate and an opening for the router to fit in to. This may look like something that’s difficult to achieve but, I aim to show you a method I like that’s easy and very effective in providing you with a neat end result.
This weekend, the weather’s been so nice that I couldn’t think of a better way to spend my Saturday afternoon that cutting up a sheet of dust-ridden 18mm MDF on the drive! 😀
Staddons must’ve received their delivery later on Friday afternoon, as they had a sheet ready to cut to size by the time I arrived on Saturday morning. After studying a cutting sheet I’d set out using the components in Google SketchUp, I asked them to crosscut the sheet at 1600mm, leaving <840mm x 1220mm on the other end. I was a bit optimistic when I assumed that this would fit to my small van with ease… It did fit but, the larger half was angled at a position that meant it resting against my head during the short journey back to the workshop! I wish I’d taken a photo! 😉