Closing Holes

While on Friday I set about correcting the sagging wall unit in my kitchen, Saturday morning was partially spent filling a couple of large holes between cabinets. When I say ‘holes’, I’m actually referring to the vacant spaces that can sometimes be found between wall cabinets. Personally, if I was designing a kitchen, I’d try to exclude them, even where the can be used to run services (pipes an wires).

In my experience, they’re a trap for cobwebs and a flue for downwards draughts that aren’t welcome in winter. That’s why I decided to look at enclosing them.

Continue reading “Closing Holes”

Lipping Forwards

You may have already guessed by now that I didn’t get much done on the router table last weekend. Actually, I barely spent any time in the workshop at all. I find it hard to go in there sometimes… Not just because I live further away now but, when working with wood and power tools for four-and-a-half days a week, I often feel as though I’d like to be doing something different on a weekend. I guess that workshops are a lot like relationships and women in that respect… Every now and again, we need a little time apart from one another! 😛

This afternoon and, with the up-and-over door wide open, I braved the unbearable heat(!) of my small workshop in order to begin working on the top to my new router table. First, I needed to lip all the edges of the MDF sheet with some kind of hardwood.

Looking at the photo above; can you guess which species I used, before clicking below to read on? 🙂

Continue reading “Lipping Forwards”

Router Table Begins!

This weekend, the weather’s been so nice that I couldn’t think of a better way to spend my Saturday afternoon that cutting up a sheet of dust-ridden 18mm MDF on the drive! 😀

Staddons must’ve received their delivery later on Friday afternoon, as they had a sheet ready to cut to size by the time I arrived on Saturday morning. After studying a cutting sheet I’d set out using the components in Google SketchUp, I asked them to crosscut the sheet at 1600mm, leaving <840mm x 1220mm on the other end. I was a bit optimistic when I assumed that this would fit to my small van with ease… It did fit but, the larger half was angled at a position that meant it resting against my head during the short journey back to the workshop! I wish I’d taken a photo! 😉

Continue reading “Router Table Begins!”

Christmas 2011

This isn’t going to be as scintillating as I would like. At least, not on the woodworking front, anyway. I’m sure there are others out there who discovered several wood or tool-related gifts lying under their tree this year and that’s great. I rarely ever ask for woodworking kit at Christmas because I fear that the buyer won’t fully understand what they’re buying or what it could mean for me. Neither am I in favour of identifying the item in a catalogue – where then, is your surprise and delight on the big day? Not to mention the fact that woodworking, as a whole, is rather expensive; regardless of whether you’re an occasional hobbyist or someone who works with their hands full-time for a business.

This year, I didn’t ask for anything at all! There are one or two power tools that I’d like to buy in the new year but again, cost becomes an issue and, really, I should be looking to invest in some timber for 2012, as I really don’t feel like I got much done in the past twelve months. If I have to, I can certainly get along with what I already have. It’s not as if I ‘need’ even one small item that’s otherwise halting all progress in my workshop. If anything, it’s a combination of the weather and life in general that’s keeping me inactive right now.

Regardless of all that; I was very happy to receive one particular gift, this year:

Continue reading “Christmas 2011”