Continuing straight on from Saturday’s efforts in the previous post; Sunday began with the finalisation of a few areas in preparation for the final assembly and glue-up of the rear ‘fixed’ portion of the folding desk.
I wanted to cut away a portion of each ‘foot’ so that it would sit more comfortably on a level floor and, as luck would have it, my under-used 6in diameter Sander Sitter provided me with the perfect radius. I cut the waste away with a jigsaw and cleaned it up a bit on my bobbin sander.
Continue reading “Folding Desk, Day Three”
I’ve probably said this before but, it really never seizes to amaze me just how long even a ‘simple’ pine project can take to make! You visualise all the basic things but, in spite of the training I’ve had in making furniture, I easily forget some of the necessary practices – like sanding to remove machining marks. I do sometimes wish I had a drum sander to simply send boards through as I seem to be going through 120g 4in wide sanding belts at an alarming rate. Pine is sticky stuff with all the resins and that doesn’t help. Really, I should be looking to use 80g for all the donkey work (that would explain why I haven’t so many 80g belts left but, I’m now down to my final 120g belt in the box…).
Plenty has been going over the weekend and, if I were to update it all in this single post, you’d still be reading it by the time I leave for work tomorrow morning (once I’d finished writing it!). So, in this post, I’ll just update you on Saturday’s events, with Sunday’s efforts to follow tomorrow (I’m secretly hoping to have this finished-or-very-close by next weekend…!).
Continue reading “Day Two on the Desk”