For this window-mirror, I wanted to use rectangular glazing that would complement the functional window that this construction is likely to be situated across the room from. Looking around at various packs of glass tiles and they only appeared to come in square sizes. For a while, I was tempted to buy a pack of mirrored-acrylic tiles from a seller on eBay, knowing they can be cut with woodworking equipment.
Looking around some more and I found Ikea’s Lots mirror tiles and, for the quantity I required, they were set to work out at around half the cost of the acrylic, even before postage. So, after collecting three packs from Ikea in Bristol, I was left with the challenge of having to cut the glass myself – all of which is detailed below.
It’s an old building with windows only down one wall (one in each room), as another building backs on to this. With high ceilings, it can also get dim even with the lights in full glow and, while I’ve had an idea to source a large mirror to help disperse more of the limited natural light, it may cost about the same for me to just make one.
Having met landlord for the first time and almost by chance just over a week ago now, I was given the green light to go ahead and fit a wall mirror above the bathroom sink. This is actually something I bought several weeks ago from a well-known Swedish furniture emporium… But hey, if it balances out my morals then I ended up spending a greater value of money on Pic’N’Mix sweets that day!! 😉
After fitting the mirror, I decided that I wanted to make one other alteration and that was to increase my sense of privacy within this ground-floor flat. I naturally have to lower the blind when I’m taking a shower and with the toilet sat in front of the window, well, you can imagine how uncomfortable I sometimes feel with the window at head height!
So, I’m now going to show you how I went about fitting some self-adhesive privacy film.