This may come as news to a lot of readers, as I don’t think I’ve mentioned it previously, but my mum and sister decided to welcome a new puppy in to their lives, a few weeks before Christmas.
His name is Billy and he’s a ‘Morkie’ (Maltese/Yorkshire Terrier-cross). Mum was asking about a temporary fence to cordon off the shared driveway. Because they live in rented accommodation as well, this needed to be a freestanding option.
I took some measurements, browsed around online and eventually came up with the following.
Continue reading “Billy-Proof Fence”
Part 5 in my Picket Planters video series was uploaded to YouTube yesterday evening. I’ve dubbed it as the ‘penultimate’ episode in this particular playlist but, it may turn out to be the final video, as I realised (shortly after uploading) that I’ve mis-placed (perhaps, even, deleted) the final scenes of footage I recorded about two-months ago… 😳
All the ‘exciting’ stuff will have been witnessed, by the time you’ve finished watching this latest instalment so, you’re not missing out on much in the practical sense, at least, if this does end up being the last in the series. There’s only one scene that I can recall and that was basically me talking about the painted finish I had decided to go with – if the worst comes to it, I could always summarise that in an additional blog post, should the missing video footage not re-emerged (I have checked both of my SD cards).
As always, if you cannot get the video to load here for you on WordPress, please try clicking this link, which will take you directly to YouTube.
Comments are always welcome. I was actually quite pleased with this one. Alright, so I’m still about as vocal as a doormouse but, I thought that the animations and transitions between scenes worked very well…
With any luck, I’ll have another (more concise!) video series starting in a couple of weeks and, I’m also looking to round-off the long-forgotten Towel Stand Project in the near future… 😳
Thanks for reading and for watching.
Remember that video series I started on making a pair of Picket Planters? Yeah, that was some time ago, back in the summer, now… After Part 3, I just sort of trailed off, couldn’t find the time to sit down and edit the outstanding [quantity, not quality!!] video clips on my computer. So, it’s been a very long while but, I am relieved to reveal that the fourth instalment in this series is now available for your viewing pleasure:
In this episode, I assemble both of the end frames, in preparation for a larger glue-up, next time.
Actually, it went live last night so, I apologise for the delay in bringing this information to your attention, if you weren’t already aware. There’s plenty of footage available for Part 5 and, as much as I’m hoping I’ll be able to wrap this series up with that, I can almost clearly see a sixth part to this on-going tale just over the horizon!
If the video isn’t working for you hear, please try clicking this link, which will take you directly to the page on YouTube.
Thank you for watching.
As I’m sure you’ve guessed simply from reading the title of this post, the third instalment of the Picket Planters series is now live on YouTube. Now, it’s time to get busy doing some “more interesting” work on this project. You get to see the jigs I made to do the round-topping and how the Supertuff blades from Tuff Saws perform.
In retrospect, I do wish I’d filmed a longer scene for each of the two round-topping sections (that’s the pickets and also the posts). I can see now how it might appear to be quite ‘short-lived’, with only one cut recorded for each operation. It comes across as very brief, in contrast to the rest of the video, I think. Especially when I wanted this to be the main focal point of this episode… 🙄
We live and learn and learn is always the latter!
Part 4, once it’s ready, will show you how I came to assemble these planters – and, with the larger one of the two in particular, it wasn’t easy with the low roof I fitted earlier this year!
Thanks for watching!
Part 2 is my Picket Planters video series is now online. It starts off with more machining and ends with all the mortises having been cut on my benchtop, cast-iron hollow chisel mortiser.
In Part 3, I’ll begin by round-topping all the pickets and posts on the bandsaw and, after that, I’ll looking at cutting the tenons on the ends of each rail.
Thanks for viewing.
I know it’s wrong of me to begin uploading another series before officially ending the previous one (I still haven’t filmed the final scene for the Kitchen Towel Stand project) but, I’d like to get the first two videos on the planters I’ve been making online fairly quickly. There’s a lot of machining covered in these first two parts and I know that may not be of as much interest to everyone as the later scenes.
Part 1 is also a great advert for the Supertuff Fastcut blades available from Tuff Saws in the UK. I’m aiming to get Part 2 ready in the next couple of days and will let you know as soon as it’s online.
Despite my regular absence from these pages lately, the two planters that I’ve quietly been working on are nearing completion. I will have some video for you in good time (or, you could browse through a selection of photos in my Flickr album).
Continue reading “Oil Going Well?”
Last Sunday, I took a drive in to Bristol to collected a job-lot of 3x3in treated, sawn timber that was being advertised on one of the local sites. There were thirty-two lengths in total, each one measuring just under 4ft in length (given the untreated ends, it looks as though they were 2.4m lengths, cut in half). This same advert also appeared on eBay and the seller was asking for £40 for the lot. That is a very good deal, considering that you’d normally expect to spend £3 or £4 per length for 4ft 3x3in posts brand-new today. So, you can imagine how good I felt when he accepted my cash offer of £30… 😎
Continue reading “Bargain Wood”