As I’m sure you’ve guessed simply from reading the title of this post, the third instalment of the Picket Planters series is now live on YouTube. Now, it’s time to get busy doing some “more interesting” work on this project. You get to see the jigs I made to do the round-topping and how the Supertuff blades from Tuff Saws perform.
In retrospect, I do wish I’d filmed a longer scene for each of the two round-topping sections (that’s the pickets and also the posts). I can see now how it might appear to be quite ‘short-lived’, with only one cut recorded for each operation. It comes across as very brief, in contrast to the rest of the video, I think. Especially when I wanted this to be the main focal point of this episode… 🙄
We live and learn and learn is always the latter!
Part 4, once it’s ready, will show you how I came to assemble these planters – and, with the larger one of the two in particular, it wasn’t easy with the low roof I fitted earlier this year!
Thanks for watching!
Part 2 is my Picket Planters video series is now online. It starts off with more machining and ends with all the mortises having been cut on my benchtop, cast-iron hollow chisel mortiser.
In Part 3, I’ll begin by round-topping all the pickets and posts on the bandsaw and, after that, I’ll looking at cutting the tenons on the ends of each rail.
Thanks for viewing.
Don’t worry – I haven’t come over all “Nu Yoik“!! Tuesday afternoon saw the arrival of a bundle of pressure-treated, stress-graded softwood from my local BuildBase. All these long lengths were conveniently unloaded directly off the lorry with one of those grab-things on the back – a real godsend in saving both time and energy! This wood was purchased to allow me to fit a suspended, overhead, storage floor in my compact workshop – something for which I actually began planning for three-years ago! Most of the narrower stuff will be used to frame the inside of the roof, ready for insulation boards. It was cheaper for me to buy (and store!) this lot at the same time, as BuildBase offer free delivery on all orders of £200 or more (excluding VAT). Not pictured are the seven sheets of 2400 x 600 x 18mm MR chipboard flooring, which will be laid directly on top of the joists.
After placing the order seven-days in advanced, I was surprised to receive a phone call with only a few minutes, confirming my order and offering next-day delivery!! Are all builder’s merchants this efficient?! If not for other arrangements I’d already made, I’d have happily taken all this wood on board to make an early start on this project.
Continue reading “Joist in Time!”