As I’m sure you’ve guessed simply from reading the title of this post, the third instalment of the Picket Planters series is now live on YouTube. Now, it’s time to get busy doing some “more interesting” work on this project. You get to see the jigs I made to do the round-topping and how the Supertuff blades from Tuff Saws perform.
In retrospect, I do wish I’d filmed a longer scene for each of the two round-topping sections (that’s the pickets and also the posts). I can see now how it might appear to be quite ‘short-lived’, with only one cut recorded for each operation. It comes across as very brief, in contrast to the rest of the video, I think. Especially when I wanted this to be the main focal point of this episode… 🙄
We live and learn and learn is always the latter!
Part 4, once it’s ready, will show you how I came to assemble these planters – and, with the larger one of the two in particular, it wasn’t easy with the low roof I fitted earlier this year!
Thanks for watching!
Part 2 is my Picket Planters video series is now online. It starts off with more machining and ends with all the mortises having been cut on my benchtop, cast-iron hollow chisel mortiser.
In Part 3, I’ll begin by round-topping all the pickets and posts on the bandsaw and, after that, I’ll looking at cutting the tenons on the ends of each rail.
Thanks for viewing.
I know it’s wrong of me to begin uploading another series before officially ending the previous one (I still haven’t filmed the final scene for the Kitchen Towel Stand project) but, I’d like to get the first two videos on the planters I’ve been making online fairly quickly. There’s a lot of machining covered in these first two parts and I know that may not be of as much interest to everyone as the later scenes.
Part 1 is also a great advert for the Supertuff Fastcut blades available from Tuff Saws in the UK. I’m aiming to get Part 2 ready in the next couple of days and will let you know as soon as it’s online.
Despite my regular absence from these pages lately, the two planters that I’ve quietly been working on are nearing completion. I will have some video for you in good time (or, you could browse through a selection of photos in my Flickr album).
Continue reading “Oil Going Well?”
Back to college this week after the Christmas break and another week off due to snow (with the exception of two students, last Friday…). That large quantity of 2in. ash I showed you previously had reached an average moisture content of 10-11% during the break, which meant it was ready for roughing out and cutting up this week. Read All About It!