With just two-days left to run on this one, I thought it was about time I got around to providing you with a bit of an update and a few photos of what you’re missing out on if you haven’t been already.
Since the last update on the side table I’m building, I’ve got to the position now where the frame is all glued up and I’m now well in to working on the quartered walnut-veneered top. While I’ve kept my progress posts updated regularly on a couple of UK woodworking forums, I do apologise for not keeping you guys better informed here, on my blog – it’s just that, I’ve learnt so much from the forums over the years that I feel like I almost ‘owe’ them something in return… Sorting through my images and typing all that text can take a good hour, after which, there aren’t always enough hours in the day to start blogging (it is World Cup season, after all!! 😀 …No, as an Englishman, I probably shouldn’t be smiling, at this point!).
Yesterday, I made a start on my side table and I’m still aiming to have this one complete by the end of the month. If you want any more detail on the build, I’ve started a thread on an all-new UK woodworking forum – The Wood Haven. I decided I would start by shaping the legs on my router table which, to me, makes cutting the mortises much easier. I’ve seen some pretty horrific accidents in my time on UKworkshop so, I’m always wary of performing “dangerous” operations like this – especially when your trimming cutter has 55mm of sharp blades! That’s why I made a simple modification to my leg templates, which should keep both hands and all my digits out of harm’s way:
Just in time for the half-term break, I got my arm chair all glued up at college. It’s quite a relief to finally reach this stage of this build in particular! Even though, I still have a bit of sanding and tidying up to do. To be honest, I’m not sure I would have had enough cramps, had I decided to do this one in my own workshop…
With two July exhibitions looming and a stack of 2in ash left over at college, I’m currently at the design stage for a side table to go with the “Two Tone Throne” [or, chair!!] that I’ve been making this year. My chair will feature at both exhibitions although, as I’m paying a bit extra for the Inspire show (several days after Furnish) and each maker/artist is allowed to exhibit two pieces, I feel it makes sense to try and produce one other piece within the time I have left; something that won’t have been exhibited elsewhere.